Circular Compression Jig with Linear Bearing Guides
Circular compression jig with linear bearing guides to maintain parallel alignment of face plates.
|Maximum Capacity||2.5 kN||562 lbf|
|Minimum Load Cell||100 N||22.5 lbf|
|Max Sample Diameter||115 mm||4.5 in|
|Eye End Diameter||31.7 mm||0.62 in|
|Weight of Upper Platten||2.5 Kg||5.5 lb|
Compression testing of corrugated cardboard and paper products. A test piece of corrugated cardboard or paper is placed between the platens of a crush tester with the flutes perpendicular to the platens. It is then subjected to compression until failure. The maximum force sustained by the test piece is measured.
Note: The platens may be faced with a very fine abrasive paper, but where this is done, care must be taken to ensure the faces remain flat and parallel.