Close

Mark-10

CC-PEEL Series Digital Test System for ISO/IEC 10373-1 Credit Card Peel

The CC-PEEL series was developed as an affordable All-In-One system to perform the ISO/IEC 10373-1 90° peel test. This test method is specific to credit / debit card type samples such as gift cards, ID cards, and membership / loyalty cards (not to be confused with other 90° peel tests like ASTM B571, D2861, or D6252).

The CC-PEEL system is based on a motorized test stand with a high precision load sensor. The components are paired to digital controllers to give travel instructions and capture force data. Fixtures (see to the right) specifically designed to meet the specifications outlined in ISO/IEC 10373 are mounted onto the sensor and test frame to properly articulate the sample and insure test repeatability and reproducibility.

All CC-PEEL systems have integrated overload protection to protect the precision load sensors. Testing is performed with the push of a button and the system quickly returns to its starting position when the test is complete. All test results are automatically displayed on the digital display and can be exported to a PC using the included software and USB cable. The system configuration including the test setup itself can be locked by password.

Travel specifications are common across all standard system configurations. The maximum peel length is 12in [305mm]. Unless modified by the operator, the peel propagation rate is 11.8in/min [300mm/min] as outlined by ISO/IEC 10373-1. The propagation speed has an error of less than ±0.02in/min [0.6mm/min].

Force measurement specifications vary by system capacity

Part   Number

Capacity

Resolution

Accuracy

lbf

N

gf

lbf

N

gf

lbf

N

gf

CC-PEEL-02

2

10

1000

0.0005

0.002

0.2

±0.002

±0.001

±1

CC-PEEL-05

5

25

2500

0.001

0.005

0.5

±0.005

±0.0025

±2.5

CC-PEEL-10

10

50

5000

0.002

0.01

1

±0.01

±0.005

±5

CC-PEEL-20

20

100

10000

0.005

0.02

2

±0.02

±0.01

±10